|
HOW TO INSTALL THE ENGINE OIL DRAIN VALVE |
|
| 1. | Unscrew your
stock drain plug. And install our "DRAGON" Engine Oil Drain Valve using a
1.00 inch adjustable wrench or a 23mm open spanner. CAUTION: Install the Valve with its CAP on. This avoids any damage to the bottom threads. |
|
HOW TO DRAIN OIL FROM THE ENGINE OIL DRAIN VALVE |
||
| 2. |
 |
Unscrew the cap by rotating it anti-clock-wise. The valve is now ready for draining oil either hot or cold. |
|
HOW TO DRAIN OIL FROM THE ENGINE OIL DRAIN VALVE |
||
| 3. |
 |
THE DRAINER COMES WITH A 2 FEET PVC DRAIN PIPE ATTACHED. ALL YOU HAVE TO DO IS MAKE SURE YOU HAVE A OIL CATCHER OR CONTAINER UNDERNEATH THE PVC PIP AND PUSH THE DRAINER INTO THE VALVE. |
| 4. |
 |
Once the oil is completely drained, simply pull out the drainer and screw the cap back on. Make sure that the steel cap has an O-Ring in it. After you screw the steel cap back on, you are ready to pour fresh oil into your engine.
THIS MAKES IT AS SIMPLE AND EASY! To find which valve fits your engine please click here |
Questions? Comments? Contact LOFMR:
(904) 381-8229 Mon.-Fri., 8:00 a.m. to 4:00 p.m. EST
(904) 378-4421 Mon.-Fri., 3:00 p.m. to 6:00 p.m. PST
Email: sales@trasko-usa.com
©2002 Trasko-USA, Trasko-Bee Corp, Trasko Korea Co.
Ltd. All rights reserved.